Wright Tool Company, LLC Contracts in Michigan

Overview

Total Contract Value: $1,917,555

Contract Count: 100

Average Contract Size: $19.2K

Sole Source Rate: 0%

Small Business Rate: 0%

Awarding Agencies

1. General Services Administration — $1.9M (100 contracts)

Spending by Sector

• Other: $1.9M (97 contracts)
• Defense: $11.1K (2 contracts)
• IT: $8.9K (1 contracts)

Contracts

• SATS APPROVED P/N:TOOL LOAD — $1.3M
• POWER UNIT,FASTENERL: TYPE: AIR-HYDRAULIC;NON-SPARKING DESIGN OPERATING AIR PRESSURE: 90 PSI DIMENSIONS: 17-1/2 INCHES WIDE X 39-5/8 INCHES LONG X 25-1/2 INCHES HIGH FEATURES: PULL HANDLE END USE: USE TO POWERHI-SHEAR CORP. RIVET GUN PN BG2500 ACCESS — $22.9K
• WRENCH, TORQUE: IAW SOCIETY OF AUTOMOTIVE ENGINEERS, AEROSPACE HAND TORQUE WRENCHES (MECHANICAL, IMPULSE) AS28431 REVISION A, DATED FEBRUARY 21, 2011. TYPE I: BI-DIRECTIONAL TORQUE WRENCH CLASS 2 RATCHET HEAD (PRECISE CLOCKWISE TORQUE) OVERALL LENGTH — $19.7K
• TOOL KIT, VEHICULAR, SPECIAL PURPOSE: SNAP-ON INDUSTRIAL PN T-BOBKIT (PARTIAL DESCRIPTION) — $18.6K
• SCALER,NEEDLE,PNEUMC: -SEE ATTACHED DOCUMENT FOR DETAIL. — $16.8K
• TOOL KIT, WEAPONS CLEANING: - SEE ATTACHED DOCUMENT FOR DETAIL. — $16.0K
• BLADE, HAND HACKSAW: IAW AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) B94.52M-1999. BLADE LENGTH: 10 INCHES TEETH: 32 PER INCH MATERIAL: STEEL COMPOSITE BLADE FEATURES: FLEXIBLE, BI-METAL (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION) — $15.9K
• BAR, PINCH: TYPE III: PRY BARS CLASS 4: PINCH OVERALL LENGTH: 26 INCHES BAR STOCK SZ: 3/4 INCH MATERIAL: STEEL (PARTIAL DESCRIPTION) — $15.1K
• DRILL SET,TWIST SNAP-ON INC P/N: DB160C — $12.1K
• STRAIGHTEDGE: STYLE: MACHINIST'S PARALLELISM TOLERANCE FOR WORKING EDGES: 0.001 INCH STRAIGHTNESS TOLERANCE ON BEVELED WORKING EDGE: 0.0005 INCH STRAIGHTNESS TOLERANCE ON SQUARED WORKING EDGE: 0.0006 INCH HARDNESS: 22-32 HRC BEVEL DEGREE: 20 DEGREES — $11.7K
• TOOL BOX,PORTABLEGSA PURCHASE DESCRIPTION 5140-00-226-9021. EXCEPTION TO TECHNICAL DOCUMENT: COLOR. BOX BODIES, LIDS, TRAYS, AND DRAWERS, EXCLUDING HARDWARE, SHALL HAVE A DURABLE RED BAKED FINISH IAW GOOD COMMERCIAL PRACTICE. HARDWARE SHALL BE FINISH — $11.7K
• TOOL KIT, INDIVIDUAL DEPLOYMENT: - SEE ATTACHEDDOCUMENT FOR DETAIL. — $11.2K
• TOOL KIT, WEAPONS CLEANING: - SEE ATTACHED DOCUMENT FOR DETAIL. — $10.6K
• CHEST, INTERMEDIATE, MOBILE TOOL CABINET: WIDTH: 26 INCHES DEPTH: 17 INCHES HEIGHT: 13 INCHES DRAWER QUANTITY: 3 DRAWERCAPACITY: 25 POUNDS MAXMATERIAL: STEEL COLOR: SEAFOAM GREEN FEATURES: BALL BEARING DRAWER SLIDES; DRAWER LINERS CHAMPIONTOOL STORAG — $10.2K
• TOOL KIT, WEAPONS CLEANING: - SEE ATTACHED DOCUMENT FOR DETAIL. — $10.2K
• SEE DESCRIPTION IN BPA. — $10.1K
• NUT, CENTER: DIAMETER: 2 INCHES FUNCTIONAL DESCRIPTION: THREADED 2 INCH CENTER NUT IS USED TO HOLD BACK-UP SANDING DISK PADS ONTO 4-1/2 INCH OR 7 INCH SANDERS. DESCO MANUFACTURING CO. INC. PN. 500.071 (PARTIAL DESCRIPTION) — $10.0K
• WRENCH,PIPE: — $9.8K
• SCREWDRIVER SET, FLAT AND CROSS TIP: - SEE ATTACHED DOCUMENT FOR DETAIL. — $9.1K
• BIT, SCREWDRIVER: SCREWDRIVER BIT (HEX) TIP SZ: 7/32 INCH WIDTH OVERALL LENGTH: 4-13/64 INCHES HEX SHANK WIDTH: 3/8 INCH MATERIAL: STEEL COATING: OXIDE FEATURES: MANUAL TOOL (EXCEPTIONS APPLY) (PARTIAL DESCRIPTION) — $8.9K

Frequently Asked Questions

How many contracts does Wright Tool Company, LLC have in Michigan?

Wright Tool Company, LLC has 100 contracts performed in Michigan worth a combined $1.9M.

What is the average contract size for Wright Tool Company, LLC in Michigan?

The average contract size is $19.2K.

Explore More